不銹鋼新聞

不銹鋼加工新聞

您當前的位置: > 不銹鋼新聞 > 不銹鋼加工新聞 >

不銹鋼加工產品容易變形怎么辦

發布日期:2018-10-06 瀏覽次數:次文章來源:未知 作者:北京不銹鋼

導讀:不銹鋼加工產品容易變形怎么辦 不銹鋼加工容易變形,該怎么辦呢?下面北京W66利来国际不銹鋼加工廠家來為您簡單介紹一下吧。 不銹鋼在加工時肯定是會因為加工應力產生變形的,因此加工過程中,通過合理的加工工藝,如選擇合理的加工順序,一次加工量等,去控制

  不銹鋼加工產品容易變形怎么辦

  不銹鋼加工容易變形,該怎么辦呢?下面北京W66利来国际不銹鋼加工廠家來為您簡單介紹一下吧。

   不銹鋼在加工時肯定是會因為加工應力產生變形的,因此加工過程中,通過合理的加工工藝,如選擇合理的加工順序,一次加工量等,去控制這個加工變形的。具體還是要根據不銹鋼材質和零件本身結構去確定這個加工工藝的。對于焊接變形,則需要采用合理的焊接工藝,斷續焊,分段施焊,控制焊接熱輸入等方式進行控制,必要時剛性固定,或者加回火去除應力。

  不銹鋼加工容易變形,是較為常見的一個問題,可能是設備不先進造成的,還可能是溫度控制不佳,或是切削力量大小掌握不到位等引起的,所以在具體操作的時候,一定要嚴格遵照相關的規定來進行了,從而將問題減少出現。盡管容易變形,但是不少廠家通過努力已經克服了這些問題出現,呈現給大家的不銹鋼產品還是非常不錯的。文章來源(http://w6z1sy.cn)
  How to make stainless steel products easily deformed?
Stainless steel is easy to deform. What should we do? Next, Beijing Yifeng Yuan Da stainless steel processing factory will give you a brief introduction.
Stainless steel will certainly be deformed due to the processing stress, so in the process of processing, through a reasonable processing technology, such as the selection of a reasonable processing sequence, 1.
Second, to control the deformation of the process. Specifically, the processing technology should be determined according to the structure of stainless steel and parts themselves. For welding deformation,
It is necessary to adopt reasonable welding process, intermittent welding, sectional welding, control of welding heat input and other ways to control, if necessary, rigid fixed, or add tempering to remove stress.
Stainless steel processing is easy to deform, is a more common problem, may be caused by poor equipment, may also be poor temperature control, or the size of the cutting force control.
Not in place and so on causes, therefore in the concrete operation time, must strictly comply with the related stipulation to carry on, thus reduces the question to appear. Although it is easy to deform,
Many manufacturers have overcome these problems through their efforts, and the stainless steel products presented to you are still very good.
 

熱點推薦

  • 不銹鋼廣告牌-2
  • 不銹鋼樓梯扶手-1
  • 不銹鋼廣告牌-2
  • 不銹鋼感應門3
  • 不銹鋼感應門2
  • 不銹鋼廣告牌-3
  • 相關閱讀

  • 不銹鋼加工20190511
  • 不銹鋼加工2018年12月25日
  • 不銹鋼加工產品容易變形怎么辦
  • 北京W66利来国际不銹鋼加工廠開工了,歡迎來點
  • 北京不銹鋼加工廠中不銹鋼常見的焊接方式
  • 影響不銹鋼加工產品表面質量的主要因素
  • 不銹鋼新聞   NEWS
    聯系我們   Contact Us